-
2024-10-15
Autoclave Validation 高压蒸汽灭菌验证
The process of sterilization within an autoclave chamber is a critical process!高压灭菌室内的灭菌过程是一个关键过程！THP Validator无线温度压力验证仪，可以进行高温蒸汽灭菌验证。
查看详情 >
-
2024-10-15
Data Logger Calibration 无线验证仪的校准
Calibration is the process of establishing the relationship between a measuring device and the units of measure.
校准是建立测量设备和测量单位之间关系的过程。查看详情 >
-
2024-10-16
Depyrogenation 除热原
The removal of pyrogens from glass and lab equipment in dry heat autoclaves is called Depyrogenation.在干热高压釜中去除玻璃和实验室设备中的热原称为去热原。THP Validator无线温度验证仪，可以进行干热灭菌/除热原验证。
查看详情 >
-
2024-10-16
Dry Heat Sterilizer Validation干热灭菌器验证
Dry heat is sometimes used for sterilization instead of the much more efficient moist heat.使用干热代替更有效的湿热进行灭菌。THP Validator无线温度检测仪可以进行干热灭菌的温度热分布、温度热穿透验证检测。
查看详情 >
-
2024-10-16
EtO Sterilization Validation环氧乙烷灭菌
EtO sterilization is used on heat sensitive products.环氧乙烷灭菌用于对温度敏感的产品消毒和灭菌。THP Validator 可以进行环氧乙烷灭菌的温湿度分布验证检测。
查看详情 >
-
2024-10-16
Freeze Drying Validation 真空冷冻干燥机验证
The freeze drying or lyophilisation process requires both monitoring and validation of the process chamber.冷冻干燥或冻干过程需要对处理室进行监控和验证。THP Validator无线温度检测仪可以进行冻干机SIP在线灭菌验证、冻干机板层温度均匀性验证。
查看详情 >
-
2024-10-16
Hot Air Tunnel Validation热风隧道烘箱验证
Dry heat is sometimes used for sterilization instead of the much more efficient moist heat because some materials are sensitive to moisture.有时使用干热隧道灭菌代替更有效的湿热进行灭菌，因为某些材料对水分敏感。THP Validator无线温度检测仪可以进行隧道烘箱温度热分布、热穿透验证检测。
查看详情 >
-
2024-10-16
Incubator Validation孵化器验证
Laboratory Incubators require validation according to the normal pattern of installation qualification,or IQ, operational qualification, or OQ, and performance qualification, or PQ.实验室培养箱需要根据安装、运行、性能确认。THP Validator无线温湿度验证仪可以进行QC实验室设备的3Q验证，温湿度均匀性、波动度、温湿度上下偏差热分布验证检测。
查看详情 >
-
2024-10-16
Lyophilization Validation冻干验证
The freeze drying or lyophilisation process requires both monitoring and validation of the process chamber冷冻干燥或冻干过程需要对处理室进行监控和验证。
查看详情 >
-
2024-10-16
NADCAP Pyrometry Audit AMS2750航空航天高温热处理测量
AMS2750现在要求供应航空工业的热处理公司提供符合标准中规定的程序的证明。AMS2750 now demands that Heat Treatment companies supplying the aerospace industry
provide proof of their compliance with procedures laid out in the standard.查看详情 >
-
2024-10-16
Oven Dryer Validation 热风烘箱干燥机验证
Dry heat is sometimes used for sterilization instead of the much more efficient moist heat because some materials are sensitive to moisture.
干热有时被用来消毒，湿热不是更有效的方法，因为有些材料对水分很敏感查看详情 >
-
2024-10-16
Stability Chamber Validation稳定性考察室验证
Stability chambers are designed to control environmental parameters such as temperature, humidity and radiation levels.稳定室旨在控制温度、湿度和辐射水平等环境参数。THP Validator无线温湿度记录仪可以用于温湿度均匀性、稳定性、温湿度偏差测试的分布验证。
查看详情 >
-
2024-10-16
Steam Sterilizer Validation高温蒸汽灭菌验证
温度热分布、热穿透研究对于整个食品、制药、生物技术和其他行业至关重要，其中温度是加工过程中的关键参数。The process of sterilization within a chamber is a critical process and there is a regulatory requirement for validation of the process in most countries.
查看详情 >
-
2024-10-16
Sterilizer Validation灭菌器验证与确认
灭菌器的灭菌过程是一个关键过程，大多数国家都有对该过程进行验证的监管要求。The process of sterilization within a chamber is a critical process and there is a regulatory requirement for validation of the process in most countries.
查看详情 >
-
2024-10-16
Storage Area Validation仓储库房温湿度验证
Most phases of processing of product within the pharmaceutical and food industry specify controls parameters for temperature, pressure, and humidity. Thus thermal mapping is essential to control these processes.
查看详情 >
-
2024-10-16
Temperature Mapping Validation温度趋势验证
Most phases of processing of product within the pharmaceutical and food industry specify controls parameters for temperature, pressure, and humidity. Thus thermal mapping is essential to control these processes.制药和食品行业产品加工的大多数阶段都指定了温度、压力和湿度的控制参数。因此，温度热分布对于控制这些过程至关重要。如：培养箱、储存区和仓库到高压灭菌器、ETO、稳定室、隧道、干热灭菌器等等
查看详情 >
-
2024-10-16
Thermal Mapping Validation温度分布透验证
Most phases of processing of product within the pharmaceutical and food industry specify controls parameters for temperature, pressure, and humidity. Thus thermal mapping is essential to control these processes.制药和食品行业产品加工的大多数阶段都指定了温度、压力和湿度的控制参数。因此，热图对于控制这些过程至关重要。.如：培养箱、储存区和仓库到高压灭菌器、ETO、稳定室、隧道、干热灭菌器
查看详情 >
-
2024-10-16
Temperature Uniformity Survey温度均匀性测试
TQAero is software for Temperature Uniformity Survey, System Accuracy Test, Sensor Calibration Management Tools, and more....TQAero 是用于温度均匀性测量、系统精度测试、 传感器校准管理工具等的软件……
遵守 AMS2750、CQI-9和 BAC 5621 进行 NADCAP 审核。Comply with AMS2750, CQI-9, and BAC 5621 for NADCAP audits.查看详情 >
-
2024-10-16
Thermal Validation Systems温度验证系统
Problems with sterilization and process can occur with the spread of temperatures.随着温度的变化，灭菌和加工过程可能会出现问题，THP Validator 无线温度、湿度、压力验证系统可以进行温度、湿度、压力的检测，从而确认药品生产工艺的温度变化。
查看详情 >
-
2024-10-16
Thermocouple Calibration验证前校准、验证后检查
Thermocouple Calibration is the process of establishing the relationship between a measuring device and the units of measure.
查看详情 >
-
2024-10-16
Washer Disinfector Validation清洗消毒验证
ISO 15883-1:2006 specifies general requirements for washer disinfectors validation and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice.
查看详情 >
