Washer Disinfector Validation清洗消毒验证
It specifies performance requirements for cleaning and disinfection as well as for the accessories which can be required to achieve the necessary performance.
TQSoft™ thermal validation system and Reporting and Report Management module has been specifically designed to assist manufacturers, validation organizations and users meet requirements for washer disinfector validation, routine control and monitoring and re-validation, periodically and after essential repairs.
Washer Disinfector designs are varied, and consequently so are the requirements for washer disinfector validation. Multi chamber washers can require a combination of thermocouples (for sump, walls, and control locations) and remote battery powered loggers for the load (as it travels through the chambers), and pressure transducers for chamber pumps. A TQSoft™ thermal validation system can easily merge data from different devices to compile an integrated report.
The TQSoft™ thermal validation system is used by most leading washer disinfector validation companies, and at leading training establishments in the UK for ISO 15883 and HTM 2030/2031 compliance.
TQSoft™ thermal validation system and Reporting and Report Management module has been specifically designed to assist…
洗衣机消毒器验证
ISO 15883-1:2006规定了清洗消毒器验证及其附件的一般要求，这些附件旨在用于清洁和消毒可重复使用的医疗器械以及医疗、牙科、制药和兽医实践中使用的其他物品。
它规定了清洁和消毒以及达到必要性能所需的配件的性能要求。
TQSoft™ 热验证系统以及报告和报告管理模块专门设计用于帮助制造商、验证组织和用户满足清洗消毒器验证、常规控制和监控以及定期和必要维修后重新验证的要求。
清洗消毒器的设计多种多样，因此清洗消毒器验证的要求也多种多样。多室洗衣机可能需要组合使用热电偶（用于油槽、墙壁和控制位置）和用于负载的远程电池供电记录仪（当负载穿过室时）以及用于室泵的压力传感器。 TQSoft™ 热验证系统可以轻松合并来自不同设备的数据以编制综合报告。
TQSoft™ 热验证系统被大多数领先的洗衣机消毒器验证公司以及英国领先的 ISO 15883 和 HTM 2030/2031 合规性培训机构所使用。
TQSoft™ 热验证系统以及 报告和报告管理 模块经过专门设计，可帮助……
欲了解更多信息，请联系我们的产品经理和验证工程师
Tel：021-68902733,18302112429
TQSoft热验证软件在这样的质量管理体系中可以发挥重要作用。
Washer Disinfector Validation清洗消毒验证
